Reflow soldering related machine




RF-210VRF-221RF-250RF-250N2RF-250-8
Heating sectionZones1258ZonesHeating section
Length150mm400mm1000mm1600mmLength
Width150mm140mm150mmWidth
Height of an inlet50mm20mm(At the time of sub-heater use.)40mmHeight of an inlet
HeatingMethodHot plateHot plate
(Only the 4th zone is up IR heater used together.)
Hot plate
(1st to 7th zones are up IR heater used together.)
MethodHeating
Temperature controlP.I.D. temperature controllerTemperature control
Max temperature400°C270°C400°CMax temperature
ConveyorMethodCarrier Bar(Push Work by Metal)
system or 0.125mmt Teflon Sheet
(or 30µmt SUS304 Sheet) carrier system
Teflon belt.Carrier bar (metal fitting to push back of board) system.
or Teflon sheet carrier system.
MethodConveyor
Width150mm140mm150mmWidth
Speed13.7 to 9999mm/min(Digital)140 to 1040mm/min(Analog)50 to 1000mm/min(Digital)Speed
Direction-L→RR→L or L→R (at user's request)R→LDirection
CoolingDirect cooling from Cooling Plate
underneath of Work
Natural coolingForced cooling by a fan on the outlet side.Cooling
Power supply Single phase 200/220/240V 1.5kW Single phase 120/220V 720W Single phase 220V About 7.5kW Single phase 240V About 13.6kW Power supply
Nitrogen supply quantityabout 10L/one-time-about 20 to 100L/min-Nitrogen supply quantity
Safety devicesLeak/Over-current breaker
Emergency stop switch
-Leak/Over-current breaker, Emergency stop switch, Alarm output (over/under temperature)Safety devices
-Alarm output (heater disconnection)Signal tower
-Torque limiter for chain conveyor
External dimensions(mm)(W)600×(D)800×(H)860(W)800×(D)370×(H)234(W)1680×(D)550×(H)391(W)1680×(D)550×(H)1070(W)2370×(D)550×(H)620External dimensions(mm)
Weightabout 135kgabout 25kgabout 120kgabout 170kgabout 181kgWeight